Fork Case2
Designed for handling automotive wheels. Handling is done by simply inserting the forks into both ends of the wheel. This allows for easy handling.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMS-75 |
| Main Body options |
|
| Pedestal model | SNS-75 (Floor mobile) (Special) ・Guides with no caster wheels |
| Control method | Regulator control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 35kg |
|---|---|
| Max. working radius | R2202mm |
| Operating air pressure | 0.49MPaG |
| Air consumption | 153NL/min（Approx. 10s cycle time） |
| Net weight(W/P not included) | 660kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
External Clamp Case5
Designed and developed for handling automobile crankshafts. Since this end effector is equipped with mechanisms that clamp the outside of the crank...
Fork Case2
Designed for handling automotive wheels. Handling is done by simply inserting the forks into both ends of the wheel. This allows for easy handling.
Hang Case3
This one is used for installing seats in the cabin of a small excavator. End effector hooks the seat belt with a specially designed hook and place ...
Vacuum Suction Case5
This end effector is designed for mounting vehicle windshields. Equipped with vacuum suction mechanism and a mechanism that can adjust the tilting ...
BMS-75